Step-by-Step Instructions

Following the below steps will get your Revv 1 display back to the original factory settings. 

NOTE: Depending on the generation of your Revv 1 display, the P10 settings may not be available. If the P10 mode is not present, a factory reset will not be possible on your display.

Step 1: Turn on your Revv 1 bike and ensure the display is on the main screen > Press and hold the "M" button to access the settings screen. 

Step 2: On the settings screen > Press the "M" button to get into 0000 screen > enter code 1919. Your display will enter Advanced settings. Number Selection: Use the + - Buttons to change the digits. Use the Power button to move > select the digits.   

Step 3: Tap the "M" button to navigate to the P10 setting; this should default to "NO" on the screen. 

Step 4: Reset to factory defaults > Press + button > navigate to YES > press and hold the "M" button to reset. 

Please reach out to our support team with any additional questions. Happy Riding!