Revv 1 Assembly Video Assembling with the help of the video guide is the recommended method to reduce questions or issues with assembly. Preass...

Assembly Video Assembling with the help of the video guide is the recommended method to reduce questions or issues with assembly. Preassembly tips an...

The Revv 1 ships directly to your door pre-programmed as a class 2 electric bike out of the box.  The "Multi-Class Speed System” lets you switch betwe...

Step-by-Step Instructions Following the below steps will get your Revv 1 display back to the original factory settings.  NOTE: Depending on the gene...

This article explains the steps to remove the rear wheel from the Ride1Up Revv 1 line of ebikes. The DRT uses slightly different axle nut and spacer details...

Introduction Replacing a damaged or inoperational Cadence sensor on the Revv 1 is a simple process. Please follow the instructions below. If the procedure ...

Your Ride1Up Revv 1 actually has a cruise mode much like the cruise control feature in your car. Turning this setting on in your display will allow you to c...

This article lays out the steps to transfer/replace the freewheel and brake rotor from the Revv 1 once you have the rear wheel removed. If you haven't r...

This written guide will walk you through assembling and attaching the Connect+ Rack & Handle for Revv1 FS and HT Refer to the YouTube assembly video be...

Use the following information to reassemble the rear wheel onto the Revv 1 DRT. Note the orientation of parts, as they differ from the HT and FS models. If ...